General security and configuration steps
To enable general security
1 Display the
Main menu
.
2 Highlight ‘Setup Options’ and press
.
3 Highlight ‘Security’ and press
(or click one of the arrow buttons) to
select ‘Enabled’.
4 Now create a new password for the ADMIN user account - see below.
To set an ADMIN password
1 Display the
Main menu
.
2 Highlight ‘Configuration’ and press
.
3 Highlight ‘Unit Configuration’ and press
.
4 Using the cursor keys, move the cursor to the ‘Admin Passwd’ field.
5 Enter an appropriate password for the ADMIN user account with regard to
the following:
• The password can be up to 16 characters long.
• The password can use letters, numerals and/or punctuation marks in any
combination.
• The password is case sensitive.
Note: The field background colour will remain red until sufficient characters
have been entered to form a reasonably robust password.
6 Once the password has been entered, you can navigate away from the
menu page and it will be automatically saved.
What to do if the ADMIN password has been forgotten
.
To change the hotkeys
The SC5-4xIP unit uses
and
as its standard hotkeys. These can be
changed if they clash with other software or hardware within the installation.
1 Display the
Main menu
.
2 Highlight ‘Setup Options’ and press
.
3 Highlight ‘Hotkeys’ and press
(or click one of the arrow buttons) to
select the required hotkey combination. The options are:
Ctrl+Alt, Ctrl+Shift,
Alt+Shift, Alt Gr, Left+Right Alt, Left Ctrl+Alt or Right Ctrl+Alt.
Registering users and host computers
All user and host computer registration is achieved solely via the global
(network) connection to the SC5-4xIP unit. See
Appendix 2 - Configuration
pages via viewer
for details.
