Subject
to
change
without
notice
Owner Manual
Operating Instructions
2.1A-30004-A02
Page 32 of 36
LINCOLN GmbH & Co. KG Postfach 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
Manufacturer
Designation
Base soap
Min. delivery temperature
AGIP
F1 Grease 24
Ca
ARAL
Multi-purpose grease ZS 1/2 Ca/Li
-20 ° C
AUTOL
Top 2000
Ca
-10 ° C
AUTOL
Top 8000 W
Ca
-20 ° C
BP
Lubrication grease
Ca
BP
C1 Lubrication grease
Ca
-20 ° C
CASTROL
CLS - Grease
Ca/Li
ESSO
Cazar K2
Ca
ESSO
High-pressure grease
Ca
FIAT LUBRIFICANTI
Comar 2
Li
-25 ° C
FINA
Ceran LT
Ca
-20 ° C
FINA
Ceran WR2
Ca
FUCHS
FN 745
Ca
-25 ° C
FUCHS
Renocal FN3
Ca
-20 ° C
FUCHS
Renolit HLT 2
Li
-25 ° C
KLÜBER
Centoplex 2 EP
Li
MOBIL
Mobilgrease
Li
-30 ° C
MOLYKOTE
TTF 52
non-organic thickening agent
-30 ° C
OPTIMOL
Longtime PD 2
Li
- 20 ° C
OPTIMOL
OLIT CLS
Li/Ca
- 15 ° C
SHELL
Retinax C
Ca
WESTFALEN
Gresalit ZSA 2
Li
-15 ° C
ZELLER & GMELIN
ZG 450
Li
ZELLER & GMELIN
ZG 736
Li
Bio-degradable greases
Manufacturer
Designation
Base soap
Min. delivery temperature
ARAL
BAB EP 2
Li/Ca
AUTOL
Top 2000 Bio
Ca
-25 ° C
AVIA
Biogrease 1
Li
up to 0 ° C
DEA
Dolon E 2
Li
-15 ° C
FUCHS
Plantogel S2
Li/Ca
KLÜBER
Klüberbio M32 - 82
Ca
-20 ° C
Lubricants (Cont.)
The pump 233 has been designed to dispense commercial
greases up to NLGI grade 2.
Important:
Absolute cleanliness is essential when handling
lubricants. Impurities will remain suspended in the lubricant
and cannot settle. This will result in a blockage of the feed
lines and thus damage the bearings.
Tested lubricating greases for pump 233
Use lubricants with solid matter additives only after having consulted the manufacturer of the system.
Important:
The manufacturer of the centralized lubrication
system will not accept any liability for:
- damage due to the use of greases which are not or only
conditionally pumpable in centralized lubrication systems
- damage caused by insufficient lubricant or irregular pump
refilling.
In case of doubt ask manufacturer of central lube system.