Subject
to
change
without
notice
Owner Manual
Operating Instructions
2.1A-30004-A02
LINCOLN GmbH & Co. KG Postfach 1263 D-69183 Walldorf Tel +49 (6227) 33-0 Fax +49 (6227) 33-259
Page 31 of 36
1171b95
Attaching boreholes of the 2 l, 4 l, 8 l pump
Note: Tighten pump models with 2 L - flat-type, 4 L - and 8 L reservoir with three fastening screws (see point R 9,5).
Fig. 45 - Dimensions
Important:
The manufacturer of the centralized lubrication system tests the lubricants
exclusively on their
transportability in centralized lubrication systems
, not on their compatibility with other material.
The lubricants tested did not cause any damage due to incompatibility on the material used by us. The
composition
of the lubricants, their
behavior
during the transport and their
compatibility
with other material are
not known to us
.
Lubricant recipes may change.
In case of doubts, send your request for more information to
the manufactuer of the centralized lubrication system.
The manufacturer of the centralized lubrication system can accept no liability for:
- damages on parts of the centralized lubrication system caused by chemical or biological changes of the lubricant
used.
- damages due to the use of greases that are not or only conditionally transportable in centralized lubrication
systems.
Important:
The lubricants released by us
have not been tested
with regard to their
long-term behavior.
Therefore, we can give no guaranty for damages caused by chemical reactions of the lubricant with components of
the centralized lubrication system.
Lubricants