24
Part Number 11020000499 Rev B (1/17)
Operation
Section 3
SELECTING A PRESET
1. Press and hold the desired control key (for example,
1). After four seconds, the display will change from
the temperature and time display or PRESET (1-4) to
PRESET 1.
2. Release key immediately. Preset 1 is now active
and PRESET 1 ACTIVATED is displayed for 3 seconds
and then reverts back to PRESET 1 as shown on the
following illustrations:
The control will now operate with the time
and temperature settings that were stored into
PRESET 1.
Each of the PRESET keys (1 to 4) are set and
selected in the same manner.
To Change Conveyor Speed
(When configured with split belt)
1. When the oven is turned on, all belts will automatically
begin running. For conveyor speed adjustment, press
and hold the TIME key until the desired conveyor is
shown on the display.
2. Press the PLUS or MINUS key until the desired belt SET
POINT TIME is displayed. While pressing the button, the
display will show which belt is being adjusted. You will
need to continue holding the button for approximately
four seconds.
3. The display will show “Please Release” when it is time to
let go of the button. The belt speed will be set.
4. To change the second belt speed, press and hold the
same button that you did before.
Oven Shut-Down Instructions
1. Turn the ON/OFF switch to the “OFF” position. The oven
will now shut down and cease operation.
Cooking Guidance
1. Allow oven heat to stabilize for 30 minutes minimum:
• At start from OFF
• After each preset change
• After any cook temperature change
