Part Number 11020000499 Rev B (1/17)
15
Section 2
Installation
3.
How to Stack a Double Stack:
The stand is a 50" (1270 mm) x 40" (1016 mm)
rectangle. Set it in place with a 50" side facing out. This
will be the front of the oven. Ovens on casters require
a level floor. NOTE: The oven top is packed with oven
stand. Remove top from stand before assembly.
P/N 4001
A. Remove the first oven from the dolly and set it on
the stand. The control panel should be on the right
rear as you face the oven. Be sure that the oven
sets squarely on the stand and is fully seated.
B. Place the second oven on top of the first one. Be
sure that it is sets on squarely and is fully seated.
The control panels go on the right rear. Now install
oven top.
