A-1
INSTALLATION
CROSS COUNTRY 300
TECHNICAL
SPECIFICATIONS
CROSS COUNTRY 300 (K4166-1)
Welding Process
DC Stick Current
DC Constant Voltage
Touch Start™ TIG
Output Range
40 to 300 AMPS
14 to 32 VOLTS
20 to 250 AMPS
Welding Output
Current/Voltage/Duty Cycle
300A / 32V / 100%
300A / 32V / 100%
350A / 28V / 100%
250A / 20V / 100%
ENGINE
LUBRICATION
Full Pressure
with Full Flow Filter
ENGINE WARRANTY
*
:
2 year complete (parts and labor)
3rd. year major components (parts and labor)
AIR CLEANER
Single Element
MUFFLER
Low noise Muffler:
Made from long life, aluminized steel.
ENGINE IDLER
Automatic Idler
ENGINE PROTECTION
Shutdown on low oil
pressure & high engine
coolant temperature
FUEL SYSTEM
Mechanical Fuel Pump, Auto air bleed system
Electric shutoff solenoid Indirect fuel injector
GOVERNOR
Mechanical
Electronic
EPA EMISSION
K4166-1 Tier 4 Final
INPUT - DIESEL ENGINE
RATED OUTPUT @ 104°F(40°C) - WELDER
PHYSICAL DIMENSIONS
(1)
Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to rated capacity. When welding, available
auxiliary power will be reduced.
*
Engine warranty may vary outside of the USA. (See Engine warranty for details).
**
To Top of enclosure, add 5.50”(139.7mm) to top of exhaust pipe. Add 4.97”(126mm) to top of Lift Bail.
***
Outside width of Base. Add 3.00” (76.2mm) to outside of mounting feet.
(2)
Reduced to less than 30V in the stick mode when VRD (Voltage Reduction Device) is on.
(Optional) VRD (VOLTAGE REDUCTION DEVICE)
See Installation and Operation sections for an explanation.
OUTPUT @ 104°F(40°C) - WELDER
Make /Model
Kubota*
V1505
RECEPTACLES
(2) 120VAC Duplex (5-20R)
GFCI Protected
(1) 120/240VAC Dual Voltage
Full KVA (14-50R)
(1) 240VAC 3-Phase (15-50R)
AUXILIARY POWER CIRCUIT BREAKER
Two 20AMP for Two Duplex Receptacle
(1) 50Amp for Dual Voltage and 3-Phase (3-pole)
OTHER CIRCUIT BREAKERS
10AMP for Engine Battery
Charging Circuit
Description
4 Cylinder
naturally aspirated
Water Cooled
Diesel Engine
Speed (RPM)
High
1890 RPM
Full Load
1800 RPM
Low Idle
1350 RPM
Displacement
91.41cu. in. (1.5ltr)
Bore x Stroke
3.07” x 3.09”
(78mm x 78mm)
Starting System
12VDC Battery and starter
(Group 34; Battery 535 cold
crank amps)
Capacities
Fuel: 11.6gal.(44L)
Oil: 6.4qts.(6.0L)
Radiator Coolant: 4.8qts.(4.5L)
Welding Range
30 - 300 Amps PIPE/CV
Open Circuit Voltage
(2)
60 Max OCV @ 1800 RPM
Auxiliary Power
(1)
11,500 Watts Peak, / 10,000 Watts Continuous,
60 Hz 120/240 Volts Single Phase
12,500 Watts Peak, /11,000 Watts Continuous,
60 Hz, 240 Volts 3-Phase
Height
Width
Depth
Weight
31.94
**
in. (811 mm)
24.00*** in. (609 mm)
56.00 in. (1422 mm)
1034 lbs. (470kg.) (Approx.)
MACHINE SPECIFICATIONS
LIFT BAIL WEIGHT RATING 2300 LBS. (1043KG.) MAXIMUM