50
ULM.0.01.000RE_10_08_20
Fig. 6.10 4-20mA current output setup
“4-20mA output corresponds to”
– choose whether the current signal would cor-
respond to the product level in vessel or distance to the product (see Fig. 3.9).
“Sensor mounting height”
– input distance (Н) from transmitter mounting flange
to the vessel bottom in millimeters.
The H value is used for the vessel filling level
calculation (see Fig. 3.9).
“4mA current corresponds to the level (distance)”
, mm. It sets minimum current
4mA correspondence to product level in vessel (distance to the product).
“20mA current corresponds to the level (distance)”
, mm. It sets maximum cur-
rent 20mA correspondence to product level in vessel (distance to the product).
Signal processing
is the device parameterization according to the measurement
conditions.
Fig. 6.11 Setting signal processing parameters
