8.Technical Specifications
94
8.
Technical Specifications
Unless otherwise specified, the technical specifications applied are for XDS2000
dual-channel series only, and Probes attenuation set as 10X. Only if the oscilloscope
fulfills the following two conditions at first, these specification standards can be
reached.
This instrument should run for at least 30 minutes continuously under the
specified operating temperature.
If change of the operating temperature is up to or exceeds 5
℃
, do a
"Self-calibration" procedure (see "
How to Implement Self-calibration
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Performance Characteristics
Instruction
Bandwidth
100 MHz
Vertical Resolution (A/D)
12 bits
Channel
2 + 1 (External)
Waveform Refresh Rate
55,000 wfms/s
Acquisition
Mode
Normal, Peak detect, Averaging
Sample rate
(real time)
Dual CH
500 MS/s
Single CH
8 bits
mode 1 GS/s
12 bits
mode 500 MS/s
Input
Input coupling
DC, AC , Ground
Input impedance
1 MΩ±2%
, in parallel with
15 pF±5 pF
Input coupling
0.001X - 1000X, step by 1 – 2 - 5
Max input voltage
1MΩ
：
≤300 Vrms
Bandwidth limit
20 MHz, full bandwidth
Channel –channel
isolation
50Hz: 100 : 1
10MHz: 40 : 1
Time delay between
channel(typical)
150ps
Horizontal
System
Sampling rate range
Dual CH
0.05 S/s
～
500 MS/s
Single CH
8 bits
mode
0.05 S/s - 1 GS/s
12 bits
mode
0.05 S/s - 500 MS/s
Interpolation
(Sinx)/x, x
Record length
2 channels ON: max 10M;
1 channel ON: max 20M.
