4.Advanced User Guidebook
61
How to Clone a waveform
You can clone the waveform of one or both channels between two cursors, and save it
in the internal memory or on a USB memory device. You can save four cloned
waveforms in the instrument internal memory. The waveform files saved to a USB
memory device are saved with the extension "ota".
You can also use OWON AG1022F or AG2052F signal generator to read *.ota files
and recall the cloned waveforms.
Clone Wave menu
shows as follows:
Menu
Setting
Instruction
Source
CH1
CH2
CH1&CH2
Clone the waveform of CH1
Clone the waveform of CH2
Clone the waveform of CH1 and CH2
Line
a
b
ab
x
Turn the
M
knob to move line a.
Turn the
M
knob to move line b.
Two cursors are linked. Turn the
M
knob to move the
pair of cursors.
Set the cursors to select the entire screen automatically.
Save
Save
Save the waveform between two cursors
Memory
Internal
USB
Select the memory location
To clone waveform and save to the internal/USB memory:
(1)
Push
Save
button.
(2)
Select
Type
in the bottom menu, in the left menu, turn the
M
knob to select
Clone
.
(3)
Select
Source
in the bottom menu, select one channel (
CH1
/
CH2)
or two
channels (
CH1&CH2
) in the right menu for Source.
(4)
Select
Line
in the bottom menu. If
a
or
b
is selected, turn the
M
knob to move the
cursor. If
ab
is selected, turn the
M
knob to move the pair of cursors. If
x
is
selected, the entire screen will be selected automatically. The waveform
information is displayed at the left bottom corner of the screen.
Length
Frequency
Time
Note
: If "
Out Of Limits
" appears in the information or a message "
Waveform
points beyond the limit.
" appears on the screen, that means the length of the
cloned waveform exceeds the limit. When the source is CH1 or CH2, the
maximum length is 2M; When the source is CH1&CH2, the maximum length is
1M. Push the
Acquire
button, select
Length
in the bottom menu, and set the
record length to a smaller value.
(5)
Select
Save
in the bottom menu.
