3.Junior User Guidebook
16
zoom mode.
Introduction to the Trigger System
, there are one knob and three buttons make up
Trigger
Controls
.
The following practices will direct you to be familiar with the setting of the trigger system
gradually.
Figure 3-13 Trigger Control Zone
1.
Push the
Trigger Menu
button and call out the trigger menu. With the operations of
the menu selection buttons, the trigger setting can be changed.
2.
Use the
Trigger Level
knob to change the trigger level setting.
By turning the
Trigger Level
knob, the trigger indicator in the screen will move up
and down. With the movement of the trigger indicator, it can be observed that the
trigger level value displayed in the screen changes accordingly.
Note
: Turning the
Trigger Level
knob can change trigger level value and it is also
the hotkey to set trigger level as the vertical mid point values of the amplitude of the
trigger signal.
3.
Push the
Force
button to force a trigger signal, which is mainly applied to the
"Normal" and "Single" trigger modes.
