Lilliput OWON VDS6000 Series, User Manual

Page: 53 / 58

５３
VIII. Technical Specifications
i. Set the probe compensation at x10 for physical probe;
ii. Under suitable operation temperature, work the device for 30+ minutes without interval;
iii. Provided the environment temperature gets 5 degrees more, or less, to self-calibrate the device
through Utility menu, via “Self Cal” option (please refer to Self Cal ).
The following technical specifications been measured on the basis of above operation,
Oscilloscope Part -
Bandwidth
VDS6102 100MHz
VDS6152 150MHz
VDS6102A
8-bit mode 100 MHz
12-bit mode 100 MHz
14-bit mode 20 MHz
VDS6152A
8-bit mode 150 MHz
12-bit mode 100 MHz
14-bit mode 20 MHz
Vertical Resolution (A/D)
VDS6102
VDS6152
8 bits
VDS6102A
VDS6152A
8 bits / 12 bits / 14 bits
Channel Q'nty 2
Acquisition
Mode sample, peak detect, average
Sampling Rate
VDS6102
VDS6152
2-CH working 500 MS/s
1-CH working 1 GS/s
VDS6102A
VDS6152A
2-CH working
8-bit mode 500 MS/s
12-bit mode 250 MS/s
14-bit mode 100 MS/s
1-CH working
8-bit mode 1 GS/s
12-bit mode 500 MS/s
14-bit mode 100 MS/s
Input
Input Coupling DC, AC, ground
Input Impedance 1 MΩ ± 2%, in parallel with 15 pF ± 5 pF
Supported Probe x1, x10, x100, x1000
Max Input Voltage 40V (DC + AC Peak)
Bandwidth Limit 20MHz, or fullband
Channel Isolation 100 : 1 @ 50Hz; 40 : 1 @ 10MHz
Time Delay Between
Channel (typical)
150 ps