Lilliput OWON VDS6000 Series, User Manual

Page: 31 / 58

３１
8 Bits
indicates the device works in 8-bit vertical resolution from ADC
12 Bits indicates the device works in 12-bit vertical resolution from ADC
14 Bits Indicates the device works in 14-bit vertical resolution from ADC
viii. how to set built-in function generator
The built-in function generator of 5MHz frequency output available from the device, with 4 basic waves
output - sine, square, ramp and pulse, through MULTI communication interface.
From Function menu, via , enter into " Function Generator " option.
i) choose preferred wave type from "Type", either Sine, or Square, or Ramp, or Pulse;
ii) input Frequency range, remember to match its unit - Hz / kHz / MHz;
iii) set Offset correctly
Further, Symmetry option comes under Ramp wave Type; and Duty Cycle option available in Pulse wave
Type.
ix. how to use cursor measurement
From Function menu, via , enter into " Mark Cursor " option.