Lightware UCX Series, User Manual

Page: 5 / 109

UCX series – User's Manual 5
Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3
7.6. Welcome Screen Settings ...........................................................68
7.6.1. Display Welcome Screen Image ..................................................... 68
7.6.2. Display Welcome Screen Text ........................................................ 68
7.6.3. Set Welcome Screen Text ............................................................... 68
7.6.4. Reset Welcome Screen Image ........................................................ 68
7.7. Video Port Settings - USB-C Related Commands ......................68
7.7.1. Restart Link Training ....................................................................... 68
7.8. Audio Port Settings ....................................................................68
7.8.1. Switch Audio Input .......................................................................... 68
7.8.2. Query the Connected Source .......................................................... 69
7.8.3. Query the Connected Destinations ................................................. 69
7.8.4. Set Autoselect Operation Mode ..................................................... 69
7.8.5. Set the Followed Video Port to Autoselect .................................... 69
7.8.6. Lock the Audio Port ......................................................................... 69
7.8.7. Mute the Audio Port 1. .................................................................... 69
7.8.8. Mute the Audio Port 2. .................................................................... 70
7.8.9. Query the Audio Signal Presence ................................................... 70
7.8.10. Analog Audio Output Volume (dB) Setting ................................. 70
7.8.11. Analog Audio Output Volume Percent Setting ............................ 70
7.8.12. Setting the Balance ....................................................................... 70
7.8.13. Analog Audio Output Level Settings by Steps (dB) ..................... 71
7.8.14. Analog Audio Output Level Settings by Steps in Percent ........... 71
7.8.15. Analog Audio Output Balance by Steps ....................................... 71
7.9. USB Port Settings ......................................................................71
7.9.1. Switch USB Input ............................................................................. 71
7.9.2. Query the Connected Source .......................................................... 71
7.9.3. Query the Connected Destinations ................................................. 72
7.9.4. Lock the USB Port ........................................................................... 72
7.9.5. Setting the 5V Sending to the USB Peripherals ............................. 72
7.9.6. Set the USB Autoselect Policy ........................................................ 73
7.9.7. Set the Followed Video Port to Autoselect .................................... 73
7.9.8. Change the Autoselect Included USB Ports .................................. 73
7.9.9. Change the USB Port Priority .......................................................... 73
7.10. USB Port Settings - USB-C Related Commands .......................74
7.10.1. Set USB-C Power ........................................................................... 74
7.10.2. Set Displayport Alternate Mode Policy ........................................ 74
7.10.3. Query the Host Alternate Mode Support ..................................... 74
7.10.4. Query the Status of the Alternate Mode ...................................... 74
7.10.5. Query the Port Data Role .............................................................. 75
7.10.6. Query the Port Power Role ............................................................ 75
7.10.7. Set Port Power Role ...................................................................... 75
7.11. EDID Management .....................................................................76
7.11.1. Query the Emulated EDIDs ............................................................ 76
7.11.2. Query the Validity of a Dynamic EDID .......................................... 76
7.11.3. Query the Preferred Resolution of a User EDID ........................... 76
7.11.4. Emulating an EDID to an Input Port .............................................. 76
7.11.5. Emulating an EDID to All Input Ports ........................................... 76
7.11.6. Copy an EDID to User Memory ..................................................... 77
7.11.7. Deleting an EDID from User Memory ........................................... 77
7.11.8. Resetting the Emulated EDIDs ...................................................... 77
7.12. Ethernet Port Configuration ..................................................78
7.12.1. Set the DHCP State ....................................................................... 78
7.12.2. Change the IP Address (Static) .................................................... 78
7.12.3. Change the Subnet Mask (Static) ................................................ 78
7.12.4. Change the Gateway Address (Static) ......................................... 78
7.12.5. Apply Network Settings ................................................................ 78
7.13. GPIO Port Configuration .........................................................79
7.13.1. Querying the Direction of a GPIO Pin ........................................... 79
7.13.2. Setting the Direction of a GPIO Pin .............................................. 79
7.13.3. Querying the Output Level of a GPIO Pin ..................................... 79
7.13.4. Setting the Output Level of a GPIO Pin ........................................ 79
7.13.5. Setting the Output Level for a Specified Time ............................. 79
7.13.6. Toggling the Level of a GPIO Pin .................................................. 79
7.14. OCS Port Configuration ...........................................................80
7.14.1. Querying the Input Level of an OCS Pin ....................................... 80
7.14.2. Set the Sensor Type ...................................................................... 80
7.14.3. Querying the Reported OCS State ................................................ 80
7.15. LW3 Commands - Quick Summary .............................................81
8. FIRMWARE UPGRADE ....................................................................84
8.1. Introduction ...............................................................................85
8.2. Preparation ................................................................................85
8.2.1. About the Firmware Package (LFP2 File) ...................................... 85
8.2.2. LDU2 Installation ............................................................................. 85
8.3. Running the Software ................................................................86
8.4. The Upgrading Steps ...................................................................87
8.5. If the Upgrade is not successful ................................................88
9. TROUBLESHOOTING ......................................................................89
9.1. Use Case Studies .........................................................................90
9.2. How to Speed Up the Troubleshooting Process? ......................91
10. TECHNOLOGIES ...........................................................................92
10.1. EDID Management .....................................................................93
10.1.1. Understanding the EDID ................................................................ 93
10.1.2. Advanced EDID Management ....................................................... 93
10.2. HDCP Management ....................................................................94
10.2.1. Protected and Unprotected Content ............................................ 94
10.2.2. Disable Unnecessary Encryption .................................................. 94
10.2.3. HDCP v2.2 ...................................................................................... 95
10.3. Pixel Accurate Reclocking ......................................................96
11. APPENDIX ....................................................................................97
11.1. Specifications ...........................................................................98
11.2. Port Numbering ........................................................................99
11.3. Factory EDID List ...................................................................100
11.4. Cable Wiring Guide ..................................................................101
11.4.1. Audio Ports ..................................................................................101
11.5. Mechanical Drawings .............................................................102
11.6. Factory Default Settings .......................................................104
11.7. Applied Ports (Network Settings) .........................................104
11.8. Firmware Release Notes .........................................................105
11.9. Hashtag Keyword List ............................................................107
11.10. Further Information .............................................................108
   