Lightware UCX Series User Manual Download Page 55

Page: 55 / 109

6. Software Control - Lightware Device Controller

UCX series – User's Manual

Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3

6.11.

Settings Menu

6.11.1.

Status

Status tab in Settings menu

The most important hardware and software related information can be found on this tab: hardware and

firmware version, serial numbers, MAC addresses, temperatures, and voltage information. Device label can

be changed to unique description by the

Set

button.

#buttonlock #lockbutton

You can disable the functionality of the front panel buttons with marking the

Lock front panel

option.

#devicelabel #label #producttype #firmwareversion

#status

#serialnumber

6.11.2.

Network

Network tab in Settings menu

IP address and DHCP settings can be set on this tab. Always press the

Apply settings

button to save changes.

#network #ipaddress



 



Summary of Contents for UCX Series













































































































Search results

Summary of Contents for UCX Series

Reviews:

Brands by name

Popular brands

Lightware UCX Series, User Manual

Search results

Summary of Contents for UCX Series

Reviews:

Brands by name

Popular brands