Lightware UCX Series User Manual Download Page 34

Page: 34 / 109

5. Device Concept

UCX series – User's Manual

Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3

5.6.

Ethernet Interface

Summary of Ethernet ports

USB-C

Ethernet

UCX-4x2-HC30

Ethernet Port Diagram

The device can be controlled via Ethernet (standard RJ45 connector). This interface supports:

▪

Configure the device with Lightware Device Controller. For more information about the LDC, see

Software Control - Lightware Device Controller

section.

▪

Control Lightware devices with LW3 command protocols. See more details about the Lightware

protocol in the

LW3 Programmers’ Reference

section.

▪

Establish the connection to Lightware Device Updater v2 software and perform Firmware Upgrade.

▪

Create local network, passthrough the Ethernet data traffic.

USB-C in

CPU

Ethernet

USB-Ethernet

bridge

USB-Ethernet

bridge

Ethernet

Layer

10/100

USB-Ethernet Bridge

The built-in USB-Ethernet bridge provides Ethernet for the USB-C connection. It is still available while the USB

3.1 Gen1 data channels are reserved for video or USB data transmission as it uses the USB-2.0 layer.

System Requirements of USB-Ethernet Bridge

The built-in USB-Ethernet bridge operates as a third-party USB Ethernet hub.

▪

Windows operation systems handle it plug and play.

▪

MacOS X operation systems require driver installation. Please find the driver on the following link:

https://www.microchip.com/SWLibraryWeb/producttc.aspx?product=OBJ-LAN95xx-MAC_OS_X

ATTENTION!

Enabling the third-party device operation is necessary (System Preferences -> Security &

Privacy -> General -> Allow software driver from "Microchip").

▪

For the other operation systems, please find the driver on the following link:

https://www.microchip.com/wwwproducts/en/LAN9512



 



Summary of Contents for UCX Series













































































































Search results

Summary of Contents for UCX Series

Reviews:

Brands by name

Popular brands

Lightware UCX Series, User Manual

Search results

Summary of Contents for UCX Series

Reviews:

Brands by name

Popular brands