11. Appendix
UCX series – User's Manual
104
Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3
11.6.
Factory Default Settings
Parameter
Setting/Value
Network settings
Factory default IP
DHCP
Video crosspoint settings
O1 (HDMI out 1)
I1
O2 (HDMI out 2)
I3
Audio crosspoint settings
O3 (Analog out)
I1
USB crosspoint settings
H1 (USB hub)
U1 (USB-C Host 1)
Video port settings
Display Welcome Screen Image
true
Display Welcome Screen Message
false
Allowed HDCP Version
I1, I2: HDCP 1.4; I3,I4: HDCP 2.2
DP Alternate Mode Policy
Auto
Autoselect operation policy
Disable autoselect
Signal type
Auto
HDCP mode
Auto
Power 5V Enable
On
Emulated EDID on all four inputs
Factory #47: Universal HDMI PCM
Analog audio output port settings
Volume
0.00 dB (100%)
Balance
0 (center)
Autoselect
Follow video O1
USB port settings
USB-C Power Limit
Equal output power
DP Alternate Mode Policy
Auto
Port Power Role
Dual Role
Autoselect
Follow video O1
D1-D4 Power 5V Mode
Auto
GPIO port settings
Output level
High
Direction
Input
Occupancy sensor
Sensor type
Active high
Miscellaneous
Unique port names
Cleared
Unique device label
Cleared
User EDIDs
Cleared
11.7.
Applied Ports (Network Settings)
The following ports are necessary to pass via a network switch/ firewall for a proper working between the
device and the softwares:
Purpose/function
Protocol
Port nr.
Firmware upgrade TFTP
UDP
69
UDP
49990
UDP
49995
Device Discovery
UDP
224.0.0.251:5353
Remote IP
UDP
230.76.87.82:37421
