5. Device Concept
UCX series – User's Manual
32
Applied firmware package: v1.1.0b7 | LDC software: v2.5.4b3
5.5.2.
Dante
®
Audio Interface
DIFFERENCE:
The following section refers to the UCX-4x2-HC30D model.
#new
UCX-4x2-HC30D model contains a special module that allows de-embedding the audio stream of the
incoming HDMI signal and transmitting as a 2-channel Dante
®
or AES67 source over the dedicated RJ45
connector. The chosen audio signal is mirrored to the analog audio port.
#dante #audio
The same signal is sent to both analog and Dante audio outputs. Both can be muted at the same time by
changing O3 port setting in the audio crosspoint: /MEDIA/AUDIO/XP/O3.Mute
The following command is exclusive to the analog port O3: /MEDIA/AUDIO/O3.Mute
Supported Audio
** The supported sample rates are 44.1, 48, 88,2 and 96 kHz.
Dante
®
is a registered trademark of Audinate Pty Ltd.
Important Notes
▪
The AES67 mode is supported by the UCX-4x2-HC30D which can be set in the Dante
®
Controller software.
▪
Multichannel or encoded audio format cannot be de-embedded. In this case, no audio is sent to the
Dante
®
network.
Input audio type
Signal support
2-ch LPCM **
supported
Multichannel
not supported
Compressed DTS/Dolby
not supported
Settings and Signal Routing
All these features are available in the Dante Controller software which can be downloaded from manufacturer's
web page:
https://www.audinate.com/products/software
