MX8x8DVI-DL
User’s Manual Rev. 1.0
Page 51 / 75
7.3.8. Lock specified output
Description
: Lock output <out>.
Output‟s state cannot be changed until unlocking.
Format
Example
Command {#><out>}
→ {#>05}
Response
(1LO<out²>)CrLf
← (1LO05)CrLf
Explanation
: Output 5 is locked.
7.3.9. Unlock specified output
Description
: Unlock output <out>. Now output 3 state can be changed.
Format
Example
Command {+<<out>}
→ {+<05}
Response
(0LO<out²>)CrLf
← (0LO05)CrLf
Explanation
: Output 5 is unlocked.
Info
The router issues the above response regardless of the previous state of the
output (either it was locked or unlocked).
7.3.10. Save preset to the specified memory location
Description
: Save current crosspoint configuration (output states) to preset <id>.
Format
Example
Command {$<id>}
→ {$4}
Response (
SPR<id²>)CrLf
← (SPR04)CrLf
Explanation
: Current crosspoint state is saved to preset 4, including the mute
state of the outputs.
Info:
Lock states are not saved. Lock state is assigned to the physical output of the
router. Presets don’t affect output locks.
7.3.11. Load preset from the specified location
Description
: Load preset <id>.
Format
Example
Command {%<id>}
→ {%4}
Response
(LPR<id²>)CrLf
← (LPR04)CrLf
Explanation
: Current crosspoint state is changed according to preset 4, including
the mute state of the outputs.
Info:
Lock states are not loaded. Lock state is assigned to the physical output of the
router. Presets don’t affect output locks.
