MX8x8DVI-DL
User’s Manual Rev. 1.0
Page 31 / 75
Load preset
Step 1.
Select the preset memory (Preset1...Preset32) you
want to load as the next configuration.
Step 2.
Press LOAD PRESET button or right click on the
desired preset, and click Load in the popup menu.
Now the preset is loaded.
Step 3.
The new I/O configuration is displayed on the matrix
switching area.
Save preset
Step 1.
Make the desired configuration on the matrix switching
area.
Step 2.
Select the preset memory (Preset1...Preset32) where
you want to save your current configuration.
Step 3.
Press SAVE PRESET button or right click on the
preset and click Save in the popup menu. Now the
preset is stored.
Preview preset
Step 1.
Right click on the desired preset, and click Preview in
the popup menu.
Step 2.
The preset‟s I/O configuration is displayed on the matrix switching area with
yellow squares for two seconds.
4.3.5. Preset names
To help memorizing the preset configurations, names can be assigned to saved
presets. Preset names can be maximum 16 characters long, and can contain any
ASCII characters except: ( ) { }. All characters are converted to uppercase.
Info:
If the CPU firmware version is above 2.0.0 then the preset names are stored in the
router’s memory so they can be read by another computer. Otherwise, the preset
names are stored locally in a file on the computer that was used to save the preset
names. (By default this file can be found as C:\Program Files\Lightware\
LW_matrix_controller_v3_2_0\settings.ini)
Rename preset
Step 1.
Select the preset memory (Preset1...Preset32) you want to rename.
Step 2.
Right click RENAME... in the popup menu. The Rename window appears.
Step 3.
Type in the desired name and click APPLY. Now the new preset name is
stored.
Read preset names
The control software downloads the names automatically upon establishing
connection to the matrix. Preset names can be re-read manually by clicking on the
READ PRESET NAMES button in the preset area.
