MX8x8DVI-DL
User’s Manual Rev. 1.0
Page 23 / 75
View locked outputs in TAKE mode
Step 1.
Press and release the Output Lock button.
Step 2.
The Output Lock button and all the buttons of any locked destinations lights
up, and remain illuminated for two seconds.
Lock an output in TAKE mode
Step 1.
Press and release the Output Lock button.
Step 2.
Now the Output Lock button lights up in red
, and all the locked output‟s
buttons illuminates green. (view state)
Step 3.
If no button is pressed for three seconds, the router returns to idle state.
Step 4.
If an unlit output button is pressed, it starts to blink, to indicate that it is
preselected for output locking.
Step 5.
Press and release TAKE button. The selected destinations are now locked.
Unlock an output in TAKE mode
Step 1.
Press and release the Output Lock button.
Step 2.
Now the Output Lock button
lights up in red, and all the locked output‟s
buttons illuminates green. (view state)
Step 3.
If no button is pressed for three seconds, the router returns to idle state.
Step 4.
If an illuminating output button is pressed, it goes off, to indicate that it is
preselected for unlocking.
Step 5.
Press and release TAKE button. The deselected destinations are now
unlocked.
View locked outputs in AUTOTAKE mode
In AUTOTAKE mode a destination is selected all the time. Therefore the currently
selected output and input buttons are illuminated. The Output Lock button
illuminates regarding to the lock state of the current output.
Viewing all locked outputs is not possible is AUTOTAKE mode, as pressing the
Output Lock button instantly locks or unlocks the current output.
Lock an output in AUTOTAKE mode
Step 1.
Press and release the required destination button. Now the selected
destination button and the currently configured source button light up (view
mode)
Step 2.
Press and release the Output Lock button. Now the Output Lock button
lights up in red, and lock function is activated at once. No source can be
changed at the locked destination.
Unlock an output in AUTOTAKE mode
Step 1.
Press and release the required destination button which was previously
locked. Now the selected destination button and the currently configured
source button and the Output Lock button light up
Step 2.
Press and release the Output Lock button (deselect). Now the Output Lock
button turns off, and the locking function has been cancelled.
