Page 38 / 75
TCP-serial configuration
For informational purposes, the properties of the TCP-serial interface are
displayed. This is a communication interface from the embedded Ethernet device
towards the main CPU.
The “Reset” button resets these values to the factory default, and has a safety
purpose only.
In the normal operation there is no need to reset these values. The above picture
shows the factory default values in normal operation.
4.7. Find menu
By clicking this menu, the available devices can be rescanned on the serial port
and on the Ethernet, as mentioned in the application starting phase. If the Matrix
Controller Software has a live connection to a device on a port, a question window
appears, asking if you really want to search for devices.
Clicking Yes will open the Find window. See section
about
on page
Clicking No will close the pop up window, the original connection remains active.
