Page 46 / 75
IP Address
If DHCP is not used to assign IP addresses, enter it
manually in decimal-dot notation. The IP addresses must
be set to a unique value in the network.
Subnet Mask
A subnet mask defines the number of bits taken from the
IP address that are assigned for the host part.
Default Gateway
The gateway address, or router, allows communication to
another LAN segments. The gateway address should be
the IP address of the router connected to the same LAN
segment as the matrix. The gateway address must be
within the local network.
Step 5.
When you are finished, click Apply Settings button
Info:
To continue using the website, you must type in the IP address to the browser.
5.6.3. Loading the default IP settings
Step 1.
Click on the Load Default button. Now the factory default IP address,
Subnet Mask and Gateway address is loaded into the input boxes. But they
are not saved.
Step 2.
To save the settings, click on Apply Settings button.
Step 3.
The default fix IP settings are applied:
IP Address:
192.168.254.254
Subnet Mask:
255.255.0.0
Default Gateway:
0.0.0.0
5.6.4. TCP Port Configuration
The user can configure the TCP port number, which is used to communicate with
the matrix router through LAN. The input box initially contains the current setting.
Step 1.
Type the desired TCP port number into the input box
Step 2.
Press the Apply Settings button. The new port will be active after the next
connection.
5.6.5. Loading the default TCP Port settings
Step 1.
Click on Load Default button. Now the factory default value is in the input
box, but it is not saved.
Step 2.
To save, click on Apply Settings button. The new port will be active after
the next connection.
5.7. Support
For technical support, please don‟t hesitate to contact Lightware Visual
Engineering at [email protected].
