6. Software Control – Lightware Device Controller
MX2-HDMI20 series – User's Manual
47
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
Analog input balance
Setting the value between -100 and +100 (0 = center).
Video status
The signal format and the detected parameters are described in these sections.
Video status information in the input port properties window
The following signal status information are displayed in this section:
+ 5V present, Signal present,
HDCP stream type, Signal bandwidth, Resolution, Color depth,
Color space, Color range, Colorimetry, Overscan/underscan,
HDCP status
The currently applied HDCP encryption level on the input (e.g. HDCP 1.4).
▪
non HDCP signal:
the signal is not encrypted.
▪
HDCP 1.4 stream:
the signal is encrypted with HDCP v1.4
▪
HDCP 2.2 stream (HDCP 1.4 convertable):
the signal is encrypted with HDCP 2.2 but can be converted to be
encrypted with HDCP v1.4. See the corresponding section in
(the first figure).
▪
HDCP 2.2 stream (non HDCP 1.4 convertable):
the signal is encrypted with HDCP 2.2 and not allowed to
convert and encrypt with HDCP v1.4. In this case the signal can be displayed only on a HDCP v2.2-
compliant sink device.
