13. Appendix
MX2-HDMI20 series – User's Manual
115
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
13.2.
Factory Default Settings
Parameter
Setting / Value
Network Settings
IP address
Dynamic (DHCP is enabled)
RS-232 Port
Port setting
57600 BAUD, 8, N, 1
Control protocol
LW3 protocol
General Video Settings
Crosspoint setting
Input 1 on all outputs
Emulated EDID
F49 - (Universal HDMI, all audio formats with deep color
support) on all inputs
HDMI port
HDCP enable (input)
Allow HDCP 2.2 and HDCP 1.4
Audio source (input)
HDMI
HDCP (output)
Depends on input
Signal type (output)
Auto
Conversion mode (output)
Passthrough
Audio mode: HDMI port (output)
HDMI
Audio mode: HDMI with analog audio (output)
HDMI+ANALOG
Scrambling
Auto
TMDS clock rate
Auto
Signal type
Auto
DisplayPort
HDCP enable (input)
Allow HDCP 2.2 and HDCP 1.4
Link data rate (input)
Max. HBR2 (5.4 Gbps)
Link lane count (input)
Max. 4 lane
Audio source (input)
DisplayPort
Audio Input/Output Ports
Audio source
HDMI
Audio mode (HDMI out)
HDMI
Audio mode (Analog audio out)
HDMI+ANALOG
Analog audio output
Enabled (de-embedding from HDMI signal)
Analog Audio Input Levels
Balance: 0 (center)
Gain: 0 dB
Analog Audio Output Levels
Balance: 0 (center)
Volume: 0 dB
