4. Installation
MX2-HDMI20 series – User's Manual
30
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
4.1.
Mounting Options
The matrix can be mounted in several ways by the supplied two rack ears. Allen head screws fix them to the
housing:
WARNING! M4x8 size is the longest allowed screw for fixing the ears to the housing. A longer screw
may touch internal parts.
INFO: The method is the same when the matrix would be mounted to a wall.
Standard Rack Installation (Default)
INFO: All models can be mount into the rack cabinet.
Two rack ears are supplied with the product, which are fixed on left and right side as shown in the picture.
The default position allows mounting the device as a standard rack unit installation.
ATTENTION!
Always use all the four screws for fixing the rack shelf ears to the rack rail. Choose properly
sized screws for mounting. Keep minimum two thread left after the nut screw.
Mounting with Front and Rear Rack Ears
DIFFERENCE:
Under-desk mounting is available for the 1U-high models.
ATTENTION!
Two rack ears are assembled on the matrix as default, thus, you will need two more rack
ears for this kind of installation, which can be purchased separately.
The matrix can be easily mounted under the desk by rack ears. This mounting option means
the top of the
matrix is parallel with the base surface
. Please do the following steps:
Step 5.
Release and remove the fixing screws of the rack ears on the matrix (both sides).
Step 6.
Rotate the rack ears by 90° to the desired direction.
Step 7.
Insert the screws into the holes and fix the front ears to the matrix.
Step 8.
Fix the two additional rear ears (not supplied with the product) by the screws on both sides of the
matrix.
Step 9.
Fix the matrix through the holes of the rack ears to the desired surface (screws are not supplied).
