6. Software Control – Lightware Device Controller
MX2-HDMI20 series – User's Manual
43
Applied firmware package: v1.7.0 | LDC software: v2.5.1b5
1
Device Label
The
Device Discovery
window can be opened by clicking on this ribbon. The
Device Label is displayed which is not the same as the Product Name. The
Product name is displayed in a hint box when the mouse cursor is above the
box. See more information in
section
,
and
section.
2
Main Menu
The available menu items are displayed. The active one is highlighted with a
dark grey background color
3
Navigation Panel
When the matrix size is too big to display all inputs and outputs, clicking on the
navigation bar scrolls up and down or left and right direction to reach the other
ports.
4
Standby Switch
The device can be switched to
Standby Mode
or wake up from this mode by the
button. When the matrix is in standby mode the video transmission is disabled
and the LCD is switched off. Remote connections (LAN, RS-232) remain enabled.
5
Tab Selector
Ribbon
Select the desired
Grid View, Tile View
, or
Presets
tab.
6
Input Ports
Each number represents an input port. Click on the port to display the
Port
Properties
window.
7
Connections
Grey
square means the port is available but there is no connection.
White
square
means there is a connection between the input and the output port.
8
Output Ports
Each number represents an output port. Click on the port to display the
Port
Properties
window.
9
Advanced View
Displaying the
Advanced view
page, showing the Terminal window and the LW3
protocol tree.
7.4.
Crosspoint Menu
7.4.1.
Grid View
Grid view is a user-friendly graphical interface displaying the crosspoint state of the matrix router. This is an
easy way to change between the input sources and output sinks.
#crosspoint #switch #gridview
Crosspoint menu of the MX2-24x24-DH-12DPi-R model
2
5
1
4
3
9
7
6
8
