manualshive.com logo in svg

Lightware MODEX-F15-OPTM-RX, User Manual

Share
Download
Lightware MODEX-F15-OPTM-RX User Manual Download Page 45

 

6. Software Control - Using Lightware Device Controller 

MODEX-F15-OPTS, MODEX-F15-OPTM series – User's Manual 

45

6.12. 

Settings Menu

6.12.1. 

Status

Status tab in Settings menu

The most important hardware and software related information can be found on this tab: hardware and 

firmware version, serial numbers, temperatures, operation time, and voltage information. Device label can 

be changed to a unique description by the 

Set

 button.

You can set the 

High temperature operation

 on the right panel: restart the device (default value), force operation, 

or shutdown the device.

6.12.2. 

Network

Network tab in Settings menu

IP address and DHCP settings can be set on this tab. Always press the 

Apply settings

 button to save changes. 

Factory default settings can be recalled with a dedicated button.

6.12.3. 

Backup

Details about this function can be found in 

Configuration Cloning (Backup Tab)

 section. 

 

Summary of Contents for MODEX-F15-OPTM-RX



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands