6. Software Control - Using Lightware Device Controller
MODEX-F15-OPTS, MODEX-F15-OPTM series – User's Manual
36
Analog Audio Settings - Output
The output analog audio settings are available by clicking on the
Analog Output port. The following options can be set:
▪
Volume (dB);
▪
Treble boost (dB);
▪
Bass boost (dB).
6.5.2.
Port Properties - Receiver
Click on the desired input/output port to open the port properties
window. This section shows the available settings for the various port
types.
INFO: The listed input and output port types and the available
settings may be different in your recent device. The available port
types depend on the installed video and interface Modules.
Input ports:
▪
Embedded audio
: digital embedded audio coming from the
optical input port.
▪
Forward audio
: the forwarded digital audio coming from the
optical input port.
▪
ARC input
: Audio Return Channel; the return audio signal coming
from the HDMI output port. Available only in sink devices built
with HDMI 1.4 ports or above!
▪
S/PDIF input
: digital audio received on the S/PDIF input port.
▪
Analog input
: analog audio received on the 5-pole Phoenix input
port.
Output port:
▪
Return audio
: audio signal transmitted to the transmitter via the
optical line.
▪
HDMI audio
: the embedded audio line transmitted on the HDMI
output port.
▪
DP audio
: the embedded audio line transmitted on the DisplayPort
output port.
▪
S/PDIF output
: digital audio transmitted over the S/PDIF output port.
▪
Analog output
: analog audio transmitted over the 5-pole Phoenix
output port.
INFO: The embedded audio and the forward audio are independent
signals in the fiber optical lines and they can be transmitted together.
Audio Settings
ATTENTION!
The following section lists all available settings but
they cannot be applied to all ports. Their availability depends on the
type of audio port and the installed video and interface modules in
your recent MODEX device.
▪
Change the name of the port;
▪
Mute/Unmute the port;
▪
Lock/Unlock the port;
▪
Audio mode: Analog / Digital / Mixed;
▪
Autoselect settings - see details on the next page;
▪
Analog audio settings - see details on the next page;
▪
Factory default settings.
Autoselect Mode and Settings
Autoselect mode is available on the output ports. Input port selection
can be managed automatically by enabling this function. See more
Analog Audio Settings - Input
The input analog audio settings are available by clicking on the Analog
Input port. The following options can be set:
▪
Gain (dB);
▪
Volume (dB);
▪
Balance (dB);
▪
DC filter enable / disable (the factory default value is disabled);
▪
Invert phase enable / disable (the factory default value is
disabled);
▪
Sample frequency (the factory default value is 48 kHz).
Analog Audio Settings - Output
The output analog audio settings are available by clicking on the
Analog Output port. The following options can be set:
▪
Volume (dB);
▪
Treble boost (dB);
▪
Bass boost (dB).
