Lighthouse REMOTE Active Count, Operating Manual

Page: 25 / 62

Get Started
248083401-1 Rev 5 3-11
Figure 3-14 Impactor Placement on RAC
Note:
The Impactor must
be less than 10 feet from
the RAC.
6. Attach the flow meter via a short length of Bevaline tubing to the
Flow Adjust Cover placed on the Impactor Assembly (Figure 3-15).
Install the AC cord into the RAC AC Power Input receptacle and
connect to an AC power source.
Note:
AC power must be
available within 3 feet of
the mounting location.
Figure 3-15 RAC Impactor Assembly, Flow Adjust Cover
7. Press and hold the Start/Stop button on the front of the RAC for at
least ten seconds while applying power using the rocker switch on
the bottom of the RAC. See Figure 3-16. The Power LED should
blink for a few seconds indicating the unit is in Service Mode.
Flow Adjust Cover
Impactor
Assembly
Complete