Lighthouse Handheld 3016 IAQ, Operating Manual

Page: 72 / 136

Lighthouse HANDHELD 3016 IAQ Gen E Operating Manual
4-44 5HY
Note:
When the buffer
has wrapped, the record
that is first displayed in the
Data screen is the first
record in the data buffer.
This may not be Rec#1.
If you press the single
down arrow button once,
the instrument will display
the last record in the data
buffer.
• Rec# - Identifies which record is currently viewed.
• *Recs - Displays how many records are currently stored in the
HANDHELD’s buffer. When there is an asterisk (*) next to the
word “Recs”, this means that the 3000 record data buffer has
wrapped. The basic concept is First In, First Out (FIFO).
• Size - Lists the channel sizes configured on the instrument.
• Diff#, Diff/ft3, Diff/m3 - Indicates that each channel size’s data is
displayed in differential mode. If a channel was disabled, then there
is a blank space in is column; # indicates raw counts; ft
3
and m
3
indicate normalized counts.
• Cuml#, Cuml/ft3, Cuml/m3 - Indicates that each channel size’s
data is displayed in cumulative mode. If a channel was disabled,
there will be a blank space in this column. # indicates raw counts
while ft
3
and m
3
indicate normalized counts.
• Loc - Indicates the location at which the data record was recorded.
The Location name listed is the alphanumeric label that was saved.
• Smpl - Indicates the Sample Time (HH:MM:SS) at which the data
record was sampled.
• Date - Indicates the instrument date on which the data was
recorded. The date will display in the format selected in the
configuration (MM/DD/YYYY, DD/MM/YYYY or YYYY/MM/
DD).
• Time - Indicates the instrument time at which the data was
recorded (HH:MM:SS).
• Instr - Indicates the state of the instrument at the time the data was
recorded. Instrument states include GOOD or SRVC.
If SRVC appears, printouts will say “Service Required” and the
sensor may need cleaning. Please contact Lighthouse Technical
Support at 1-(800) 945-5905 or techsupport@golighthouse.com.
• Flow - Indicates the flow state of the instrument at the time the data
record was recorded. Flow is recorded as OK or ALRM. If the flow
was in alarm, it will print as Flow: Alert on the printouts.
• Alarm - Indicates (NONE or YES) if the data record exceeded any
of the alarm thresholds of any of the channels that were enabled for
alarms. If the data record exceeded alarm thresholds, printouts
show “Alarm: Yes”.