Lighthouse Handheld 3016 IAQ, Operating Manual

Page: 96 / 136

Lighthouse HANDHELD 3016 IAQ Gen E Operating Manual
5-18 5HY
Press the threshold button next to the enabled channel in order to set the
alarm threshold for that channel. See Figure 5-17.
Figure 5-17 Configure Alarm Threshold
Enter the desired alarm threshold for the selected particle channel, in
number of particles, then press ENTER. The threshold value will be
updated on the Particle Alarm screen as shown in Figure 5-18.
Note:
Alarms are
triggered per sample
record. At the end of the
sample time, the alarms
reset.
Press BACK to return to the Configuration screen or press MAIN to
return to the MAIN screen.
Figure 5-18 MAIN screen, 0.5 — m channel enabled for alarming