![background image](http://html1.mh-extra.com/html/light-my-bricks/10270/10270_manual_1911512062.webp)
Group the three bit light cables together in between the following studs, then secure them
down by reconnecting the 1×2 tile and longer 1×8 tile on both sides. Ensure the three cables are
side by side and flat rather than over the top of each other.
Disconnect the tile with studs as well as the wireless connector tile, then bring the three cables
across toward the back. Lay 2 of them around studs before reconnecting the wireless connector
tile over the top. Bring the two cables along with the third cable toward the back and lay them
individually in between studs. Reconnect the tile with studs over the top.
Summary of Contents for 10270
