![background image](http://html1.mh-extra.com/html/light-my-bricks/10270/10270_manual_1911512086.webp)
Note: If you experience any issues with the lights not working and suspect an issue with a
component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please
view the section addressing expansion board issues on our online troubleshooting guide.
Bring the two buildings together and thread any excess cable from the 50cm Connecting Cable
back inside the blue building (as there is more space in the basement that is not visible. Securely
reconnect the two buildings together (or leave them apart depending on how you wish to
display/place them).
Lastly, reconnect the tree to the front of the set.
Summary of Contents for 10270
