LIFT-A-LOFT APX16 - G
ASOLINE
CHAPTER 2
SECTION 1
Page 11
09-26-02
NO
ITEM
FREQUENCY
14
HYDRAULIC SYSTEM (Cont.)
RETURN LINE FILTER: Remove and
replace with correct filter element.
Annually
SUCTION LINE STRAINER: Clean
Strainer.
Annually
HYDRAULIC FLUID: Drain, (Via
reservoir drain plug) flush and fill
reservoir.
Annually
15
SCISSORS RELATED
MOUNTING CLEVISES: Check all
clevises and collars for cracked welds
and any other signs of overloading and
abuse. Also check that all roll spring
pins, roll pins, hex head retaining screws
(through cylinder pin) are in place.
Every 100 hours or every month
SHAFTS: These units are permanently
lubricated, but should be checked for
wear. A Retaining (snap) ring should be
on the end of each shaft and should be
free of damage.
Every 100 hours or every month and
after cleaning or long term unit
storage.
ROLLERS: Check condition of (2) Cam
Rollers which travel along tracks on the
base and (2) which travel along tracks at
bottom of platform. Check roller tracks
for debris.
Every 100 hours or every 1 months
SEE PAGE 3 FOR
LUBRICANTS
Property of American Airlines