2
3
SAFETY INSTRUCTIONS
Most injuries are caused by misuse and/or not following instructions. Use caution when using this shed.
To ensure safety, do not attempt to assemble this shed without following the instructions carefully. Check entire box
and inside all packing material for parts and/or additional instruction material. Before beginning assembly, read the
instructions and identify parts using the hardware identifi er and parts list in this document. Proper and complete
assembly, use and supervision are essential for proper orientation and to reduce the risk of accident or injury.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS
INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
• Do not use or store hot objects such as grills, blowtorches, welding equipment, etc. in the shed.
• If using a ladder during assembly, use extreme caution.
• Two capable adults are required for shed assembly. (It is also recommended that a third adult function as an instruction reader.)
MODEL #6416
Sentinel
11’ x 13’ Outdoor Shed
Consult all local building codes, as well as city and county ordinances, to ensure
that the construction of the Outdoor Shed does not require a building permit. Proper
building permit documentation may be required in your neighborhood, and it would be
unfortunate to learn this after constructing the Shed.
Surface must be leveled before installation. We recommend building a level work
space with a cement or patio style surface. If the surface is not properly leveled, the
Outdoor shed will not assemble correctly. Proper surface leveling will save you time
in the long run, so please do not ignore this step.
Instruction #1012325
5/1/2006
Level Surface Notice:
Building Code Notice:
There is a 1/2” phillips head screwdriver bit included with the shed hardware. This bit
can be used with any power screwdriver or drill. The plastic pieces of your shed can
be damaged by overtightening of screws. To avoid damage we strongly recommend
the use of a low-powered power screwdriver or a drill that has an adjustable clutch
that is set on a low torque setting. If neither is available, use a hand screwdriver. In
any case use caution to avoid overtightening the screws.
Screwdriver Notice:
Sharp objects may damage your fl oor. If resting sharp, heavy objects on your shed
fl oor, place a block of wood between the sharp object and fl oor.
Floor Puncture Notice:
You could win $200!
Register your product at www.lifetime.com and receive three important benefi ts:
1. You automatically will be entered to win $200 in our monthly drawing!
2. In the unlikely event of a product recall or safety modifi cation, we can
notify you immediately and directly.
3. You may choose to receive Preferred Customer Announcements and
promotions regarding new Lifetime products.
www.lifetime.com
Two Adults Required for Assembly
( + one Adult suggested as an instruction reader)
Suggested Tools & Materials
(Not Included):
Step Ladder
(2)
7/16”
3/8”
(2)
(1)
Phillips Head
(1)
(1)
Power Drill *
Work Light
Adjustable
(1)
Rubber Mallet
(1)
Box Knife
(1)
Pliers
(1)
(1)
Before Beginning Assembly:
A. Read the “Congratulations” letter on pages 4-5.
B. Remove Parts List from the center of these instructions and
make sure all parts are present and in good condition.
Read This First!
For Assistance, including missing or broken parts,
Call Customer Service at:
** Customers outside of the U.S. or Canada, please contact the store for assistance. **
1 (800) 225-3865
Flashlight
(1)
* see “Screwdriver Notice” on page 2
Indicates a helpful hint or
important note.
Indicates that a hand
screwdriver is required
for a step.
**Do Not Contact the Store!**