Instruction manual
Solar Housenumber Alu-Line
1. Introduction
Dear customer, we thank you for purchasing the Solar Globelight.
With this Solar Light you have purchased a product that complies with the
latest and most up-to-date technology.
This product complies with the European and National
Standards. The relevant certificates of conformity are
deposited with the manufacturer.
To preserve this standard and in order to maintain safety you must adhere
to the use instructions!
2. Security Instructions
In the event of any problems arising or damage occur-
ring from not following these instructions, the warranty
is deemed cancelled. The manufacturer will not be held
responsible for any claims or damages arising from the
misuse of this product.
- For safety reasons and in order to maintain standards (CE) you are pro-
hibited from altering or changing any component in the product.
- Please follow the instructions very carefully.
- For commercial applications due care and attention must be paid to the
Health and Safety Standards in your jurisdiction.
3. Function and intended use
The solar house number light is designed for year-round outdoor use. It is
made of high-quality materials and thus guarantees a long function over
many years.
The powerful solar module is designed in shingle technology, the solar
house number light must be mounted on a shadow-free sunny wall.
A south, east or west side is recommended. Shady north sides or the
assembly under a shady roof projection are not suitable for solar house
number lights.
The built-in battery is charged by the solar module installed in the upper
part. The solar module consists of high-quality crystalline solar cells with
space-saving shingle technology and is laminated absolutely weatherproof
behind glass.
The house number can be set between the light colours warm white or cold
white using an enclosed IR remote control. It is also possible to switch it
ON or OFF.
At night the light switches on automatically and illuminates the number
with a weak light. If a movement is registered by the PIR sensor, the light
illuminates with maximum luminosity for approx. 20 seconds after the last
movement.
Powerful light emitting diodes (LEDs) are used as the light source. These
LEDs guarantee high luminosity with low power consumption and a service
life of over 30,000 hours.
Note: During longer periods without sunlight, the battery is insufficient-
ly charged by the sunlight and the lamp does not work in the evening.
However, this does not mean that the solar light is defective. Wait for the
next sunny days and the lamp will work again accordingly.
The battery should be changed every 3-4 years on average!
4. Commissioning
1. Carefully remove the parts from the packaging.
2. Determine the location of the solar house number light. It must be a
shadow-free, sunny place. We recommend south, east or west sides.
North sides are not suitable for solar house number lights!
3. Stick your house number onto the white sur-
face of the solar house number light using the
enclosed letters and numbers.
4. Unscrew the 4 screws on the back of the
solar house number light with a suitable
screwdriver (pic. 1) and remove the cover.
5. Remove the battery from the transport box
and connect the socket on the battery cable
with the plug on the cable of the circuit board
(pic. 2).
Note: The plug is protected against reverse
polarity! Please do not use force!
6. Now carefully insert the battery into the bat-
tery compartment and stow the cable (pic. 3).
7. Now place the cover of the battery compart-
ment so that the two arrows look at each
other (pic.).
8. Turn the 4 screws back in with a suitable
screwdriver.
9. Now mount the plastic holder on the wall with
the 3 screws provided (pic. 5) and mount the
house number light (pic. 6 rear view).
10. Now secure the solar house number light by
falling down or stealing it with the help of the
threaded screw (pic. 7 rear view).
11. Now pull the plastic strip out of the battery
compartment of the IR remote control.
12. In darkness you can now set the light colour
of the solar house number light by pressing
the corresponding button or switch off the
solar house number light. To do this, hold
the IR remote control in the direction of the
illuminated area of the solar house number
light!
Note: The battery is also charged in the
„OFF“ position!
GB
!
Battery take-back
- Batteries must not be discarded into domestic waste.
- The consumer is legally required to return batteries
after use, e.g. to public collecting centers or to battery
distributors.
- Contaminant-containing batteries are labeled with the
sign “crossed-out trashcan“ and one of the chemical
symbols. Used batteries should be disposed environ-
mentally friendly and should not be discarded into
domestic waste. Your dealer is legally required to take
back old batteries.
Li-Fe
Customer support:
If you have problems or questions regarding this product, simply contact us!
esotec GmbH, Industriegebiet Weberschlag 9, D-92729 Weiherhammer
By phone: +49 9605-92206-0
By e-mail for ordering spare parts: [email protected]
By e-mail for questions about the product: [email protected]
Manufacturer Item No.: 102650 Alu-Line black, 102651 Alu-Line nature
Rechargeable battery notes
- Rechargeable batteries should not be played with by children. Never
leave rechargeable batteries lying around; they could be swallowed
by children or pets.
- Rechargeable batteries must never be short-circuited, disassembled
or thrown into fire. This leads to a danger of explosion!
- Leaking or damaged rechargeable batteries can cause chemical
burns when they come into contact with skin. For this reason, please
make use of suitable protective gloves.
- Rechargeable batteries should only be replaced by structurally iden-
tical rechargeable batteries from the same manufacturer. Normal
batteries must not be used since these are not rechargeable.
- Make sure the rechargeable batteries are inserted with the correct
polarity.
- For long periods of time of non-use (for example, storage), remove
the inserted rechargeable batteries to avoid damages via the leaking
rechargeable batteries.
Disposal:
Dear customer,
please cooperate in avoiding waste. When you intend to dis-
pose of the product in future, please consider that it contains
valuable raw materials suited for recycling.
Therefore, do not dispose it of with domestic waste but bring
it to a collection point for the recycling of waste electrical and
electronic equipment.
Thank you very much for your cooperation!
4.
3.
2.
1.
5.
6.
7.
