18
19
12
Assemble Truss Frames
Fit two Truss Support Strips (AV) together. Bolt Truss
Support Strips, Center Gutter Connector (FD) and two
Gutter Channels (AH).
12a
Attach a Truss Channel (AM). (Truss Support Strips (AV) fi t inside Truss Channel). Attach Truss Channel
to Gutter Channel (AH) at each end.
12b
AH
AH
AH
AM
AM
AV (x2)
FB
CC
FB
CC
Hardware Bag: 1009121, 1009124
Step 12 Hardware
FB
(40)
CC
(40)
Attach Truss Assembly to two Wall Support Channels (AA). Do not
completely tighten the Nut until after truss is secured to the wall.
12c
AA
FB
CC
FB
FD
CC
AV
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department at the number
on Page One. Exposed threads on the end of
the Bolt may cause serious injuries.
Finger
Tighten
Hardware
Tighten All Hardware
Repeat these steps for all fi ve trusses.
Use Second
Holes from
the end.
7/16” Wrench, 7/16” Socket Wrench
AV
AV
AM
AA
13
Install Truss Assemblies
Starting at the back of the shed, secure a Truss
Assembly to the center of each wall panel on the Left
and Right Walls with screws (FE).
See Assembly Tip #5
(above)
.
13a
Installing Truss Assemblies
Each Wall Panel has three columns of holes. Th e
Wall supports (the legs of the Truss Assembly) are to
be attached to the second column of holes on each
wall panel of the left and right walls.
Use the
holes in
column
#2
Step 13 Hardware
Hardware Bags: 1009126, 1009124, 1009121
Screwdriver, 7/16” Wrench, 7/16” Socket Wrench
FA
(10)
Attach one Floor Bracket (FA) to each Wall Support Channel (AA) and screw the Bracket to the fl oor. You
only need to do this step if you plan to anchor your shed. See the “Anchoring the Shed” step at the end
of this manual.
13b
FB
(10)
CC
(10)
FB
CC
AA
FA
CB
At least one truss
will fall on the
Window Wall Panels.
You will need to remove
the #10 Cap Nuts (CB)
between the windows
before installing the
Truss(es). Once Truss is
in place, replace the Cap
Nuts onto the Screws.
Assembly T
ip #5
Tighten all
Hardware.
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department at the number
on Page One. Exposed threads on the end of
the Bolt may cause serious injuries.
FE
(76)
Tighten nuts
completely
1
3
2
