38
39
Install the next two Inner Roof Panels (JE)
on the left and right side of the shed. Insert
two Roof Support Strips (JK) into notches
on each panel before screwing into place.
See Assembly Tip #11 (pg. 37)
.
Repeat Step 23 for all four
center roof sections.
23a
Hardware Bags: 1009127, 1010047
Step 23 Hardware
LA
(24)
JK
JE
Install a Center Roof Cap (JA) with 1/4” x 5/8” Screws (FE) and a Skylight (JG) with #10 x 5/8” Screws (LB)
and #10 Washers (LA) to the Roof Panels.
23b
LB
(24)
Fit two Truss Support Strips
(AV) into the Inner Roof Panel
(JE) as you put it in place.
Attach Skylight with #10 Washers
(LA) and #10 x 5/8” Screws (LB).
Attach Roof Cap (JA) to Truss on both
sides with 1/4” x 5/8” Screws (FE).
FE
(112)
Screwdriver
23
Install Center Roof Sections
Only use a hand
screwdriver for the
Skylights
Install a Roof Cap Cover (AW) at the back of the Shed.
FE
24b
Hardware Bags: 1011135, 1011136
Screwdriver
Step 24 Hardware
AC
AG
Position the Outer Roof Panel A (AC) and secure to Gable and
Truss. Repeat on the other side with Outer Roof Panel B (AG).
See Assembly Tip #10 (p. 36)
.
24a
FE
(50)
AW
AW
Along the outside edges of the shed, Fasten the Trusses to the
underside of the Roof Panels (Fig. 1). Insert two Foam Cubes (BG) at
each truss location (Fig. 2).
24c
24
Install Rear Roof Section
BG
(20)
FE
FE
FE
BG
BG
BG
Fig. 1
Fig. 2
