14
15
Slide Window Hinge Tubes (KJ) into the upper and lower hinge holes and fi t a
Window Frame (JI) over the Hinge Tubes.
11
Assemble Windows
11b
Hardware Bag: 1009109
Screwdriver
Step 11 Hardware
JI
From the outside, push two #10 x .38” Flat Head Screws (KA) through the
holes in the window divider in Window Wall Panel (JH). Secure with two #10
Cap Nuts (CB).
11a
KJ
KA
CB
CB
(4)
KA
(4)
KJ
JI
11d
Attach a Window Stay Bracket (KE) to the inside of the Window Wall.
FE
FE
KE
JH
11c
Place a Window (JL) onto the Window Frame (JI). Fasten the
Window to the Frame with #10 x 1/2” Pan Head Screws (CN)
and #10 x 1/2” Flat Head Screws (KC) in the locations shown.
JL
JI
Remove
plastic fi lm
from both
sides of
window
panes before
installing.
CN
KC
JL
JL
FE
FE
KE
Hardware Bag: 1009109
Screwdriver
Step 11 Hardware (Continued)
CN
(32)
KC
(12)
FE
(8)
Use this step to install windows into both
Window Wall Panels (JH).
JH
JH
You will need to
push the screws
through the thin
layer of plastic
covering the holes.
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department at the number
on Page One. Exposed threads on the end of
the Bolt may cause serious injuries.
Only hand-tighten the nuts
in this step.
Holes w/ dashed
lines use this
screw.
Holes w/ solid
lines use this
screw.
Be sure that the middle
holes (circled w/ dashed
lines) are beveld inward so
that the top of the screw
is fl ush with the window pane
when installed.
