36
37
22
Install Front Roof Section
22a
Install Outer Roof Panels A & B (AC & AG) at the front of the
shed.
AC
AG
Hardware Bags: 1009127
FE
(24)
Screwdriver
Step 22 Hardware
Note: This is an interior upward view.
Note: This is an interior upward view.
2
3
Connect Outer Roof Panels to the Gable and Truss
1
Assembly T
ip #10
4
Install a Roof Cap Cover (AW)
22c
FE
Hardware Bags: 1009127
FE
(6)
Screwdriver
Step 22 Hardware (Cont.)
AW
Fold End Roof Cap (AQ) along its hinge. Install it at the
front of the shed.
22b
Note: This is an interior upward view.
Note: This is an
exterior view.
Only use a hand
screwdriver on this step
Note: You may need to apply pressure
to walls or roof panels to get screw pilot
holes to line up.
1. Line-up slots in gable with holes
in the Outside Roof Panel. Do not
insert screws into any slot unless you
can see the pilot hole behind the slot.
**2. Starting at the top of the
Gable, screw the Panel to the
Gable.**
3. Starting at the top of the Panel,
screw the Panel to the Truss.
4. Fit the top of the wall into the
groove at the bottom of the Roof
Panel. Attach with screws.
2
3
Connect Inner Roof Panels to the Truss
Note: You may need to apply pressure to walls or roof
panels to get screw pilot holes to line up.
1. Line-up slots in Truss with holes in the Inner Roof
Panel. Do not insert screws into any slot unless you
can see the pilot hole behind the slot.
**2. Starting at the top of the front edge
of the Panel, screw the Panel to the Truss.
Repeat for the back edge of the Panel.**
3. Fit the top of the wall into the groove at the
bottom of the Roof Panel. Attach with screws.
1
Assembly T
ip #1
1
