3. Checking the cables and supply lines
–
Check the cables visibly for damages.
–
Check the entire moving range of PAN and TILT, if the cables are not
broken
,
bended
,
stretched
or
damaged
anyhow
.
–
Are the cables not porous?
4. Checking the screw connections of the lamp fixings
–
Check all clamping bolts if they are well fixed.
Following maintenance is
recommended
:
–
Remove dust, especially on electronical parts. Electronic is very sensitive for dust and
reacts with strange behaviour!
–
Keep focus spindle inside the lamp turnable with
Loctite 8151 ™.
–
Fatten the potentiometer-toothwheel with temperature stable bearing fat.
Recommended: Use a brush to put the fat on it. Do not use to much. A few grams are
enough.
Motoryoke YipMan1 V4.58 Rev 1.00 41
