background image

P27 Speed PAN/TILT setup

At this point the number of 

speed channels 

can be set. The speed for PAN and TILT axis

can be programmed to one channel for both axis or to two channels. One for each axis.

When using the Licht-Technik control panels with Joystick, vision conrtrol or LT-Pliot this
Parameter must be set to 1.

Caution!

The  

order   of   DMX-channels

  is   changed   with   this   function!  Refer   to  

DMX-channels

motoryoke, page .

Range of values:

  0: 

Speed PAN and TILT together. One DMX-channel.

1:

Speed PAN and TILT separated. Two DMX-channels.

Operation:

                              depress   You are now on menu level. The last adjusted menu 
                                               point is displayed, e.g.:
                            

     Menu P01: 

DMX address motoryoke

                              depress   ... until Menu P27 is displayed.

                              depress    The second line displays the currently adjusted value.
                                     

                              depress   Adjust the desired value

                              depress   You are back on menu level.

                              depress   The equipment is ready for operation.

Motoryoke YipMan1 V4.58 Rev 1.00                                                                                  29

Menü

Menü

Ok

Ok

Summary of Contents for MB-DY V1














































Reviews: