A maximum of four units can controlled via Vision Control or LT-Pilot!
If you use a standard
DMX-desk
, please observe the
DMX-footprint
on page 19
If you use the
Vision-Control
or the
LT-Pilot
remote control system, please use the
following channels and programming values:
DMX-addressing and unit assignment:
The following
parameters
must be programmed possibly. (Please observe the
corresponding manuals).
Motorized yoke:
P01 =
DMX address, see above
P02 = 1
Rotation unit on (if used)
P27 = 1
Speed channels for pan and tilt seperately
P38 = 0
Rotation direction = normal.
Dimmer Shutter:
P01 =
DMX address, see above
P15 = 3
Single channel mode
Motoryoke YipMan1 V4.58 Rev 1.00 13
Unit 1
Unit 2
Unit 3
Unit 4
DMX start address motoryoke
1
21
31
41
DMX address dimmer shutter (optional)
8
9
10
11
8
9
10
11
DMX address focus unit (optional), Control
via Dimmer-Shutter function
