DMX channels motoryoke
The following chapters require the
DMX-channel assignment
of the motoryoke. Please
note the difference which is programmed in
P27, PAN/TILT DMX speed channel setup,
page 29
. This menu determines if the speed is given by
one
or by
two
channels.
Therefore, the motoryoke requires between 5 (without optional components) and 12 DMX-
channels.
If a
Joystick, Vision-control
or
LT-Pilot
is used, P27 (
page 29
) has to be set to 1. If a
standard-DMX desk is used both possibilities are possible. Choose the one you want but
keep the channel layout in mind!
The
first
address (PAN rough) is set in menu
P01, DMX-address motoryoke, page 20
. All
other addresses
follow
after this first address according to this table.
Examples:
1. Motoryoke P27 = 1 (like right column in table). The next free DMX-channel would be
number
8
. For use of an fan-focus for expample.
2. Motoryoke P27 = 0 (like left column in table). Next free channel would be channel
6
.
Please note!
Color changer, dimmer shutter and the combined device „MagVader“ are controlled by
their
own
electronic. These devices are completely independent regarding the
electronical control!
Motoryoke YipMan1 V4.58 Rev 1.00 19
Channel
Motoryoke (P27=0)
Motoryoke (P27=1)
1
PAN roughly
PAN roughly
2
PAN fine
PAN fine
3
TILT roughly
TILT roughly
4
TILT fine
TILT fine
5
PAN/TILT speed
PAN speed
6
Focus- or Rotation (optional)
TILT speed
7
Focus- or Rotation (optional)
