Libelium Waspmote Smart Parking v2, Technical Manual

Page: 83 / 155

LoRaWAN Network Server setup
6.5. MultiTech basestation
This section explains how to route information on a MultiTech basestation to the Customer Server or to the Smart
Parking Cloud Service, using the MQTT protocol.
MultiTech basestations come with an Embedded Network Server for LoRaWAN, free of cost or annual fees. Besides,
Libelium customers can purchase special models of MultiTech basestations which are ready to use, since they have
our "Custom Application" already installed. This Custom App enables automatic communication between Smart
Parking nodes and our Smart Parking Cloud Service. These special basestation models are called "Smart Parking
con
fi gured".
6.5.1. Libelium ’ s Custom App
Some MultiTech basestations come with the Libelium ’ s Custom App already installed on our facilities. Please go
to the section "Installing/upgrading Libelium Custom App" if your basestation does not have it, or if you want to
upgrade the version of the Custom App inside your basestation.
I mportant :
Our Custom App was developed for MultiTech ’ s fi rmware 1.7.4 version. At the moment, the Custom App is not
supported on fi rmware 5.0.0: this 5.0.0 version contains some known bug issues so it is not currently supported.
More information on the "Compatible fi rmware versions" section.
Log in
To start the application, fi rst go to the address where you installed your MultiTech basestation. By default, the
con fi gured address is https://192.168.2.1 . Enter your credentials and press "Login".
Figure : MultiTech login panel
Starting the Custom App
Before accessing the application, it is recommended to check its status. Go to "Apps" in the menu.
The application has 4 status:
1. Stopped : The application is stopped and cannot be accessed.
2. Started : The application is started and it will take a few minutes to be able to access the application, after
pressing the "Play" button.
3. Running : The application is running. It is possible to access it through the address where it is installed, by
adding port 3000.
4. Failed : The application has failed and it is necessary to restart it. An explanation about this status is in the
"Info" fi eld.
- 82 - v7.5