Libelium Waspmote Smart Parking v2 Technical Manual Download Page 7

Page: 7 / 155

ntroduction

Radar

Infra-red

Magnetometer

Reliability against nearby vehicle movement

Reliability against nearby parked vehicles

Reliability against electromagnetic interferences

Reliability in any lighting scenario

Stability during long-duration vehicle stays

Do not need an aperture in enclosure

Immunity against dirt or dust on enclosure

The node provides OTA-S (Over-The-Air Setup). This allows the user to remotely conﬁgure the node parameters
(sleep time, keep-alive, night-mode, etc) via the

Remote Con

ﬁ

guration Form. That makes it possible to directly

install the nodes with factory default settings and then update them from the server side.

Figure : Remote Conﬁguration Form

- 6 -

v7.5

Summary of Contents for Waspmote Smart Parking v2




























































































































































Search results

Summary of Contents for Waspmote Smart Parking v2

Reviews:

Related manuals for Waspmote Smart Parking v2

Brands by name

Popular brands

Libelium Waspmote Smart Parking v2, Technical Manual

Search results

Summary of Contents for Waspmote Smart Parking v2

Reviews:

Related manuals for Waspmote Smart Parking v2

Brands by name

Popular brands