LGMG S0507SDTCE10, Operation And Maintenance Manual

Page: 55 / 79

Operation and Maintenance Manual of Aerial Work Platform
3) Please make use the forklift rebates on both sides of the ladder.
4) Place the fork of the forklift on the forklift rebates.
5) Drive the forklift forward to completely insert the fork into the rebates.
6) Lift the machine by 15cm and slightly tilting the fork backward to keep the machine stable.
7) Keep the machine level when lowering the fork.
8) Notice: the component damage may be caused if the machine is lifted on its side.
11.4Liftingguide
1) Please completely lower the platform. Be sure to
safely and reliably fix the extending platform,
the controller and the chassis tray. Remove all
movable components from the machine.
2) The spreader can only be attached to the specified
lifting point on the machine shown. There are two long
holes in the front panel of the machine, and there are two
long holes in the rear end board. They are all used for lifting.
3) Adjust the lock tool in such a way that the machine is
not damaged and the machine is kept horizontal.
11.5 Parking and storage
Please follow the parking and storage instructions below:
1) Drive the machine to the well-protected and good-ventilation area.
2) Be sure to completely lower the working table.
3) Place the emergency stop switch on the “OFF” position.
4) If necessary, cover the control panel and the warning signs to protect them against the severe
environment influence.
5) If the machine is parked for a long period, please cover the wheels on both sides with a baffle
plate.
6) Switch the power supply selector switch to the “OFF” position and unplug the key to avoid the
starting and unauthorized use of equipment.
7) If the optional anti-breaking suit is provided, the working table and the ground control box can be
covered and locked for fear of invasion.
51