LGMG S0507SDTCE10, Operation And Maintenance Manual

Page: 50 / 79

Operation and Maintenance Manual of Aerial Work Platform
△
!
10.1 Forbidden operation, unless
The safe operation principles of the machine are understood and practiced.
1) The dangerous conditions are avoided.
2) The pre-operation inspection is always made.
3) The workstation is checked.
4) The function test is always made before the use.
5) The machine is used for its design purposes.
10.2 Basic principle
1) This machine is a self-traveling and electric elevating device, which is provided with a work
platform on a scissors mechanism. The vibration produced by the running machine causes no
hazards to the operators on the work platform. This machine can be used for carrying the workers
and their tools to the specified height above the ground and also for reaching the workstation
above the machine or equipment.
2) The details of each operation aspect are specified in the operation notice. The responsibilities of
the operator are to follow all safety regulations and descriptions in the operation and maintenance
manual.
3) It is unsafe and even dangerous to use the machine for any other purposes other than carrying the
staff, equipment, tool and material to the overhead workstation.
4) Only the trained and authorized staff can operate this machine. If the machine is running by more
than one operators of the same shift at different time, the operators must have the qualification
and follow all safety regulations and description in the operation and maintenance manual. It
means that each new operator shall make the pre-operation inspection, function test and
workstation inspection before running the machine.
10.3 Emergency stop
1) Push the red emergency stop button on the ground or platform controller to the “OFF” position to
disable all functions.
2) The recovery of any operation function must be done by pressing the red emergency stop button.
10.4 Emergency lowering
Push the emergency lowering control button outward.
10.5 Operation on the ground
1) Switch the key switch to the ground controller.
2) Place the red emergency stop buttons on the ground controller and the platform controller to the
“ON” position.
3) Keep the battery well connected before running the machine.
10.6 Platform position adjustment
Move the platform lifting and lowering switch according to the mark on the control panel. The driving and
turning functions are unavailable via the ground controller.
10.7 Operation on the platform
1) Switch the key switch to the platform controller.
2) Place the red emergency stop buttons on the ground controller and the platform controller to the
“ON” position.
3) Keep the battery well connected before running the machine.
10.8 Platform position adjustment
46