LG XPS 8500 Owner'S Manual Download

Page: 124 / 136

124

System Setup Utility

4th Boot Device

Specifies the boot sequence from the

available devices
USB Floppy Device; Internal HDD

Devices; USB Storage Device; Internal

ODD Devices; Onboard NIC Device;

Disabled (USB Floppy Device by default)

5th Boot Device

Specifies the boot sequence from the

available devices
USB Floppy Device; Internal HDD

Devices; USB Storage Device; Internal

ODD Devices; Onboard NIC Device;

Disabled (Onboard NIC Device by

default)

Power

Power Management

• Wake Up by integrated LAN — Enabled

or Disabled (Disabled by default)

• AC Recovery — Power Off; Power On;

Last Power State (Power Off by default)

• USB PowerShare in S4/S5 State —

Enabled or Disabled (Disabled by

default)

• USB PowerShare in Sleep State —

Normal; Enhanced (Normal by default)

• Auto Power On — Enabled or Disabled

(Disabled by default)

• Auto Power On Date — 0 to 31, 0 for

everyday (15 by default)

• Auto Power On Hour — 0 to 23 (12 by

default)

• Auto Power On Minute — 0 to 59 (30

by default)

• Auto Power On Second — 0 to 59 (30

by default)

book.book Page 124 Wednesday, October 10, 2012 10:32 PM

Summary of Contents for XPS 8500









































































































































Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands

LG XPS 8500, Owner'S Manual

Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands