LG XPS 8500 Owner'S Manual Download Page 49

Page: 49 / 136

Wireless Mini-Card

Wireless Mini-Card

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

CAUTION:

When the Mini-Card is not in the computer, store it in protective

antistatic packaging (see "Protecting Against Electrostatic Discharge" in the
safety instructions that shipped with your computer).

NOTE:

Dell does not guarantee compatibility or provide support for Mini-Cards

from sources other than Dell.

If you ordered a wireless Mini-Card with your computer, the card is already

installed.
Your computer supports one half Mini-Card slot for Wireless Local Area

Network (WLAN) and Bluetooth combo card.

Prerequisites

Remove the computer cover. See "Removing the Computer Cover" on

page 23.

book.book Page 49 Wednesday, October 10, 2012 10:32 PM

Summary of Contents for XPS 8500









































































































































Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands

LG XPS 8500, Owner'S Manual

Search results

Summary of Contents for XPS 8500

Reviews:

Related manuals for XPS 8500

Brands by name

Popular brands